SP10XX NOZZLES

SPRAY PATTERNS

SC (Solid Cone)

- Great for spraying a wide variety of surfaces.

- Great for thick grease and oil.

FC (Fine Cone)

- Great for spraying oil or thick grease.

- Great for applications where uniform coverage is critical.

 

EM (External Mix):
- Works great for oil
- Not for use with grease!
- Great for applications where a large surface area needs to be covered.
- Atomizes the material being sprayed!

RC (Radial Coat):
- Great for spraying the inside of a bore.

- Works well with most oil and thin grease.

- Will not work with thick grease!

AS (Airless Shot)

- Works great with thin oil, up to 30 weight

- Clean Shot, No over spray

- Has built in check valve to prevent dripping

 

HC (Hollow Cone):

- Great for spraying a surface where a large coverage area is required.

- Works well with most oil and thin grease.

- Will not work with thick grease!


Photos

SP10XX SERIES NOZZLES

PART NUMBER

MATERIAL PORTS

AIR INLET PORT

AVAILABLE SPRAY PATTERNS

X=LENGTH IN INCHES

MOUNTING STYLE

SP1022-XX-XX-XX

1/8” tube compression

 

1/8” tube barb

 

SC, HC, and RC ONLY

 

2”-24”

 

Bulkhead fitting

 

SP1045-XX-XX-XX

SP1090-XX-XX-XX

SP1022-X1-X2-X3: 

Spray Nozzle with 22.5 degree bent tube

(X1 is the spray pattern, X2 is the length from inlet to bend, X3 is length from bend to tip)

SP1045-X1-X2-X3:

Spray Nozzle with 45 degree bent tube.

(X1 is the spray pattern, X2 is the length from inlet to bend, X3 is length from bend to tip)

SP1090-X1-X2-X3:

Spray Nozzle with 90 degree bent tube.

(X1 is the spray pattern, X2 is the length from inlet to bend, X3 is length from bend to tip)


Files