Reservoir/Regulators

GRE11A
Grease reservoir / regulator with 185cc (11 cubic inch) capacity translucent reservoir with magnetic piston, two 120 v.a.c./110 VDC max. adjustable reed switches with cords, air pilot operated grease fill valve, air pressure regulator with gauge, and relief valve. Maximum primary grease pressure is 3000 p.s.i. Secondary will be 1.8X the adjusted air pressure. Automatic grease fill valve is to be pilot operated by user's solenoid valve that is controlled by users PLC using included sample of basic discrete logic.
GRE11A Catalog Page


GRE64A
Grease reservoir / regulator with 1,048cc (64 cubic inch) capacity translucent reservoir with magnetic piston, two 120 v.a.c./110 VDC max. adjustable reed switches with cords, air pilot operated grease fill valve, air pressure regulator with gauge, and relief valve. Maximum primary grease pressure is 3000 p.s.i. Secondary will be 1.8X the adjusted air pressure. Automatic grease fill valve is to be pilot operated by user's solenoid valve that is controlled by users PLC using included sample of basic discrete logic. GRE64A Catalog Page

GR3501A
The GR3501A is a 35 cubic inch capacity grease reservoir/regulator including an automatic fill valve, air pressure regulator, and grease and air pressure gauges. The GR3501A also includes a proximity sensor to provide a signal when the automatic fill valve is open, but the unit is not filling. The unit requires compressed air for operation. The grease outlet pressure will be 1.06 times that air pressure. Maximum inlet grease pressure is 3000 p.s.i. Envelope size is 10" x 15.38" x 6" and reservoir rod will not extend outside this envelope. The GR3501A will function with NLGI #00 through #2 grease.
GR3501A

GR5801B
Reservoir, Grease 58 cubic inch compressed air operated and complete with air pilot operated grease inlet valve, cam, air cam valves, compressed air pressure regulator, and gauge, and grease output pressure gauge. Assembly includes 2.5 inch bore x 12 inch stroke cylinder mounted on plate. Reservoir has been designed for grease inlet pressures between 200 and 1500 p.s.i. and will deliver grease at an output pressure of 90% of the regulated compressed air inlet pressure. Example: Air pressure regulator adjusted to 80 p.s.i. will result in a grease output pressure of 72 p.s.i. Because of the low grease pressure, the reservoir must be located within three feet of the grease dispensing components and the delivery tubing must be at least 1/4" ID. Reservoir is 19" high (30.25" with cylinder extended), 10" wide, and 7" deep and should be installed with cylinder rod end up. GR5801B Brochure



For pressure regulation without storage: Grease Regulators

Site Search

Download Adobe Reader