Company ID

NOZZLES

5/16" Plug-In Spray Nozzles

KA7195-xx
KA7195-xx
5/16: Diameter straight tip plug-in spray nozzle. (2 to 6” long)


No Image Available
KA7878

Nozzle mounting block with 1/8 NPT ports, for 5/16" Dia. plug-in spray Nozzles.




No Image Available
KA7879
Nozzle mtg. block with 1/8 NPT ports & Needle Valve for Air Flow Control.  For 5/16" Dia. plug-in spray Nozzles.


GSS-019
GSS-019
GSS spray adaptor complete 10-32 spray air port, grease "O" ring seal, and two mounting bolts.  Adaptor has female nozzle port for use with 5/16" OD tubular internal mix plug-in type nozzle.  Front surface of adaptor is also tapped 10-32 in two places.  This can be used with any KA7195 plug-in spray nozzle.


Other Spray Nozzles

KA0546 Tubular Spray Nozzle
KA0546 Tubular Spray Nozzle
Tubular spray nozzle with bulkhead fitting has grease inlet fitting for 1/8” OD tube and air inlet barbed fitting for 1/8” OD PU tube


GSS-009
GSS-009
The GSS-009 Threaded spray nozzle is constructed of brass and has M18 x 1 threads, a 10-32 grease inlet on one end, and a coaxial spray nozzle on the other end.  A separate 10-32 inlet on the side adjacent to the grease inlet is for the spray air. 


Extrusion Nozzles

No Image Available
GSS-034
Leur lock industrial needle, 0.109" OD, 0.085" ID, 4" long, SS  (use with GSS-007 adaptor)


No Image Available
GSS-035
Leur lock industrial needle, 0.109" OD, 0.085" ID, 2" long, SS  (use with GSS-007 adaptor)


GSS-007
GSS-007
GSS Leur lock fitting with nylon gasket can be installed on GSS-006 adaptor.  Many different industrial needles are available from McMaster-Carr and others, but note that needles with inside diameters of less than 0.046” do not work well for grease.