GSS SERIES NOZZLES/MOUNTING BLOCK

SPRAY PATTERNS

SC (Solid Cone)

- Great for spraying a wide variety of surfaces.

- Great for thick grease and oil.

FC (Fine Cone)

- Great for spraying oil or thick grease.

- Great for applications where uniform coverage is critical.

 

EM (External Mix):
- Works great for oil
- Not for use with grease!
- Great for applications where a large surface area needs to be covered.
- Atomizes the material being sprayed!

RC (Radial Coat):
- Great for spraying the inside of a bore.

- Works well with most oil and thin grease.

- Will not work with thick grease!

AS (Airless Shot)

- Works great with thin oil, up to 30 weight

- Clean Shot, No over spray

- Has built in check valve to prevent dripping

 

HC (Hollow Cone):

- Great for spraying a surface where a large coverage area is required.

- Works well with most oil and thin grease.

- Will not work with thick grease!


Photos

GSS SERIES NOZZLES / MOUNTING BLOCK

PART NUMBER

MATERIAL PORTS

AIR INLET PORT

AVAILABLE SPRAY PATTERNS

X=LENGTH IN INCHES

GSS-009

10-32

10-32

SC ONLY

2.00 ONLY

GSS-068-SC-X

Plugs into GSS-019

Thru Block

SC, RC, HC, EM, FC

2”-24”

GSS-019 (Mounting Block)

Mounts directly to GSS or GSSM

10-32

NA

NA

Note: GSS-068 mounts directly to a GSS dispenser with a GSS-019 adaptor


Files