GDP PUMPS

Reliable and Dependable   ·   Pump all the way to bottom of your pail   ·   Keep pump suction “off the floor”
 
GDP series air-operated pumps are engineered for production material supply.  Dual post ram assures a reliable supply with thick material that doesn’t seek its own level.  Series is available with 3” or 6” ram, many seal options, a wide range of pump ratios, and a variety of control options.  All pump options include pump, inductor seals, dual post ram, ram control valve, pump air pressure regulator, and ram air pressure, regulator

Photos

Video

Part number format: [Ram Code][Boost Ratio]-[Pail Size][Inductor Code Options][Options]

Example Part Numbers

Description

GDP25-400G00

3” ram, 25:1 with “G” seal

GDP50-400G00

3” ram, 50:1 with “G” seal

G6DP43-400I00

6” ram, 43:1 with “I” seal

GDP50-120B00

3” ram, 50:1 with “B” seal

 

 RAM CODE

CODE

RAM SIZES

MATERIAL VISCOSITY

GDP

Dual Post Ram, 3”

Grease NLGI 00-2

G6DP

Dual Post Ram, 6”

Grease NLGI 2-4, RTV, sealant

 

PUMP MOTOR / BOOST RATIO OPTIONS

CODE

BOOST RATIO

MAXIMUM OUTPUT PRESSURE

MAXIMUM OUTPUT FLOW

GDP15-x

15:1

1,500 PSI at 100 PSI air

1,400 cc/minute

GDP22-x *

22:1

2,200 PSI at 100 PSI air

1,500 cc/minute

GDP25-x

25:1

2,500 PSI at 100 PSI air

5,800 cc/minute

GDP40-x

40:1

4,000 PSI at 100 PSI air

3,600 cc/minute

GDP43-x *

43:1

4,300 PSI at 100 PSI air

2,800 cc/minute

GDP50-x

50:1

3,000 PSI at 60 PSI air(has relief valve)

500 cc/minute

GDP70-x

70:1

4,900 PSI at 80 PSI air (has relief valve)

2,000 cc/minute

All of the pump motors are available with the G6DP (6” Ram) option except the GDP15.

*

Approved for grease or RTV. All others are approved for lubricating grease only!

 

INDUCTOR SEAL OPTIONS

CODE

DRUM SIZE

SEAL MATERIAL / DESCRIPTION

B

120 lb.

Dual lip, polyurethane

G

55 gallon, 200 liter, 400 lb.

Dual lip, polyurethane

I

55 gallon, 200 liter, 400 lb.

Cast aluminum with Neoprene “O” ring seal
(For use with RTV or sealant)

P

55 gallon, 200 liter, 400 lb.

Dual lip, EPDM
(*not* for use with grease)

 

OPTIONS AVAILABLE FOR GDP PUMPS

CODE

DESCRIPTION

CODE

DESCRIPTION

00

Basic Pump (No Control Options) 

38 24 VDC Control Panel with Prime Button and Stack Light

01

Pneumatic Cam Actuated Empty Shut Off 

38-120 Adds power converter to 38

03

One DC PNP Level Sensor

38DP 24 VDC Control Panel with Auto-Depressurization, Prime Button and Stack Light

04

One DC NPN Level Sensor

38AR* Material Recirculation and Auto-Depressurization

05

Portability Kit with Castors and Handle

38AR-120* Adds power converter to 38AR

07

Grease Dispense Handle

60* Control Panel with HMI with Auto-Depressurization and Recirculation

08

24 VDC 3-way NC Solenoid Valve

61* Control Panel with HMI with Auto-Depressurization

11

Two DC PNP Level Sensors

69 Includes Auto-Depressurization and no Control Panel

12

Two DC NPN Level Sensors

70 24 VDC Control Panel with Prime Button and Stack Light with Ethernet Communication

32

Plumbing for separately purchased filter

71 Control Panel with HMI (No Auto-Depressurization or Recirculation)
34 Pneumatic Two Hand Safety Kit    
 

LOW WASTE INDUCTOR MINIMIZES WASTED MATERIAL AT BOTTOM OF THE PAIL

 

QUICK AND EASY DRUM CHANGES

Large inductor vent “T” handle bleed helps bleed thick material quicker

 

Drum centering device helps center drum under inductor during drum changes

 

Drum clamps keep the drum from lifting up during drum change

 


 

 

Files