Company ID

OIL DISPENSERS

GSS & GSSM Air Operated Oil Dispensers

  • Dispense measured shots of oil via adjustable volumetric piston displacement
  • Dispense set amounts of oil regardless of temperature and viscosity changes. See chart for part numbers and sizes
  • Dispensers operate with 60 to 120 psi compressed air
  • Fast – up to 180 shots per minute
  • Integral piston stroke sensors are available to confirm operation

Typical Uses

  • Dashboard and console pivots and buttons
  • Locking and latching components
  • Electrical components and terminals
  • Automotive HVAC components
  • Assembly lubrication for “O” rings and seals
  • Die lubrication

GSS & GSSM Oil Dispenser Catalog Adobe Logo
How the GSS/GSSM Oil Dispensers Work Adobe Logo
Adjustments and Volumes Chart Adobe Logo

GSS Oil Dispensers

The stand alone mounting of GSS dispensers allows installation at the points of use for improved dispense and transfer function.

GSS-501PNP
GSS-501PNP
GSS dispenser, adjustable, with maximum output of 0.001 cubic inch (0.016 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC PNP piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.  Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.
GSS-501PNP 3D Model SolidWorks Logo


GSS-502PNP
GSS-502PNP
GSS dispenser, adjustable, with maximum output of 0.002 cubic inch (0.033 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC PNP piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.   Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.
GSS-502PNP 3D Model SolidWorks Logo


GSS-504PNP
GSS-504PNP
GSS dispenser, adjustable, with maximum output of 0.004 cubic inch (0.066 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC NPN piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.   Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.  
GSS-504PNP 3D Model SolidWorks Logo


GSS-501NPN
GSS-501NPN
GSS dispenser, adjustable, with maximum output of 0.001 cubic inch (0.016 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC NPN piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.  Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.  
GSS-501NPN 3D Model SolidWorks Logo


GSS-502NPN
GSS-502NPN
GSS dispenser, adjustable, with maximum output of 0.002 cubic inch (0.033 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC NPN piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.   Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.   Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i. Adaptors and sandwich blocks can be purchased for installation on outlet end.  
GSS-502NPN 3D Model SolidWorks Logo


GSS-504NPN
GSS-504NPN
GSS dispenser, adjustable, with maximum output of 0.004 cubic inch (0.066 cc) includes "O" ring and tapped surface on outlet end.  An integral 10-30 VDC NPN piston position sensor outputs when air piston is in the "dispensed" position.   Sensor includes LED and its connector is M8.   Lube input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end. 
GSS-504NPN 3D Model SolidWorks Logo


GSS-511
GSS-511
GSS dispenser, adjustable, with maximum output of 0.001 cubic inch (0.016 cc) includes "O" ring and tapped surface on outlet end.  Oil input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i..  Air port is 10-32 and dispenser operates with a 3-way air valve.  Adaptors and sandwich blocks can be purchased for installation on outlet end.  
GSS-511 3D Model SolidWorks Logo


GSS-512
GSS-512
GSS dispenser, adjustable, with maximum output of 0.002 cubic inch (0.033 cc) includes "O" ring and tapped surface on outlet end.  Oil input port is 1/4 NPT and maximum recommended oil inlet pressure is 50 p.s.i.  Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.
GSS-512 3D Model SolidWorks Logo


GSS-514
GSS-514
GSS dispenser, adjustable, with maximum output of 0.004 cubic inch (0.066 cc) includes "O" ring and tapped surface on outlet end.  Oil input port is 1/4 NPT and maximum recommended oil inlet pressures is 50 p.s.i.   Air port is 10-32 and dispenser operates with a 3-way air valve with minimum of 60 p.s.i.  Adaptors and sandwich blocks can be purchased for installation on outlet end.  
GSS-514 3D Model SolidWorks Logo


GSSM Oil Dispensers

Manifold mounting of GSSM dispensers allows easier plumbing of oil supply and operating air.

GSSM-501PNP
GSSM-501PNP
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC PNP piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.001 cubic inch (0.016 cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-501PNP 3D Model SolidWorks Logo


GSSM-502PNP
GSSM-502PNP
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC PNP piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.002 cubic inch (0.033 cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-502PNP 3D Model SolidWorks Logo


GSSM-504PNP
GSSM-504PNP
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC PNP piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.004 cubic inch (0.066cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-504PNP 3D Model SolidWorks Logo


GSSM-501NPN
GSSM-501NPN
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC NPN piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.001 cubic inch (0.016 cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-501NPN 3D Model SolidWorks Logo


GSSM-502NPN
GSSM-502NPN
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC NPN piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.002 cubic inch (0.033 cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-502NPN 3D Model SolidWorks Logo


GSSM504-NPN
GSSM504-NPN
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC NPN piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.004 cubic inch (0.066cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM504-NPN 3D Model SolidWorks Logo


GSSM-511
GSSM-511
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Dispenser includes an integral 10-30 VDC NPN piston stroke sensor that outputs when its air piston is in the "dispensed" position.  This sensor includes an LED and an M8 connector.  Maximum oil output is 0.004 cubic inch (0.066cc).  Dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.  Mounting bolts and seals are included for installation on manifold.
GSSM-511 3D Model SolidWorks Logo


GSSM-512
GSSM-512
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Maximum oil output is 0.002 cubic inch (0.033 cc) and dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.
GSSM-512 3D Model SolidWorks Logo


GSSM-514
GSSM-514
GSSM dispenser designed for oil and for installation on GSSMB style manifold for use with gravity to 50 psi oil pressure.  Maximum oil output is 0.004 cubic inch (0.066cc) and dispenser includes "O" ring and tapped surface on outlet end for mounting of output adaptor.  Oil and air input ports are on bottom.  Dispenser operates with a 3-way air valve with minimum of 60 psi.  GSS series adaptors and sandwich blocks can be purchased for installation on outlet end.
GSSM-514 3D Model SolidWorks Logo


OUTLET ADAPTORS, FITTINGS, AND ACCESSORIES

Note: Some adaptors are not intended for installation on manifold mounted dispensers

Part number

Description

GSS-003

Adaptor with Bijur port for 5/32 OD (4 mm) tube

GSS-005

Adaptor with 10-32 port

GSS-006

Adaptor with 1/4-28 port

GSS-007

Leur lock fitting with 1/4-28 male port

GSS-008

Adaptor with 1/8 NPT port

GSS-009

Remote mountable M18 x 1 threaded spray nozzle

GSS-010

Adaptor with dual inlet and single 1/8 NPT outlet 

GSS-016

Adaptor for installation on customer’s tapped tooling

GSS-019

GSS spray adaptor complete 10-32 spray air port, oil "O" ring seal, and two mounting bolts.  Adaptor has female nozzle port for use with 1/4" OD tubular internal mix plug-in type nozzle. 

GSS-031

Adaptor with M5 x 0.8 port

GSS-032

Adaptor 5/16-32 port for Chinese needle

GSS-034

Luer lock industrial needle, 0.109" OD, 0.085" ID, 4" long, SS

GSS-035

Luer lock industrial needle, 0.109" OD, 0.085" ID, 2" long, SS

GSS-042

Adaptor for check valve spray nozzle

GSS-043

Check valve spray nozzle (narrow angle)

GSS-044

1/4” OD brush for push lock fitting

GSS-045

Check valve spray nozzle (wide angle)

GSS-060

GSS pistol style gun kit (pneumatic) includes mounting plate and 3-way NC air valve for GSS dispenser and bracket for tool balancer.

KA8528

ID spray nozzle with 1/8 tube oil inlet

KA9224

45 deg. tip spray nozzle with 1/8 NPT inlet

KA8679-4

Spray nozzle for ID bore coating (use with GSS-019)

SSDL2WM

2-gallon steel reservoir with wall mounting brackets, low level sensor, sight gauge, ball valve, and 100 mesh (149 micron) filter. 

SSDL2WMR

2-gallon steel reservoir with wall mounting brackets, low level sensor, ball valve, 100 mesh (149 micron) filter, and compressed air operated recirc. pump with a 24 VDC solenoid valve that requires an input for each pump stroke.  Maximum cycle rate is 40 per minute.

OP2R-5L

Air operated piston oil pump with 5:1 boost ratio, on wall mountable 2-gallon steel reservoir with sight gauge and low level sensor.

OP2R-3L

Air operated piston oil pump with 3:1 boost ratio, on wall mountable 2-gallon steel reservoir with sight gauge and low level sensor.

OP2R-1L

Air operated piston oil pump with 1:1 boost ratio, on wall mountable 2-gallon steel reservoir with sight gauge and low level sensor.

KA0564

Tubular spray nozzle with bulkhead mounting adaptor

KA7195-2

Plug-in spray nozzle (use with GSS-019)

KA7802

Plug-in spray nozzle (use with GSS-019)

KA6276SS-19

Airless squirt nozzle with check valve at tip (other lengths are available)

 

GSSMB MANIFOLD PART BUILDER

Basic Part Number

Number of Stations

Separate Air Ports

GSSMB

-2, -4, -6, -8, or -10

SA

Examples:  (maximum number of stations is ten)

Part number GSSMB-10SA is a ten-station manifold with separate 1/8 NPT air ports

Part number GSSMB-10 is a ten-station manifold without separate air ports

Part number GSSMB-2 is a two-station manifold without separate air ports

 

 

Support Center

  • Open a support ticket to:
    • Request Service
    • Request Drawings or Documents
    • Request a Quote
    • Ask a question

Enter Support Center