+1 616-399-8893  |  customerservice@gpreeves.com

SINGLE POST RAM PUMPS (GSP) FOR UV CURE

Specialized Inductor Options Help Protect UV Cure Material From Ambient Light
Reliable and Dependable   ·   Pump all the way to bottom of your pail   ·   Keep pump suction “off the floor”
 
GSP series air-operated pumps are engineered for production material supply.  Single post ram assures a reliable supply with material that doesn’t seek its own level. All pump options include pump, single post ram, ram control valve, pump air pressure regulator, and ram air pressure regulator. GSPs for UV cure materials offer three inductor options made to protect the material from ambient light. Selection of inductor depends on the material pail.

Photos

Part Number Format

[GSP Ram][Pump Motor]-[Pail Size][Inductor Seal][Options]
 

Example Part Numbers

GSP5-35BD03 has a 5:1 boost ratio, 35lb pail, an inductor designed for use with pails containing a moisture barrier bladder bag, and one DC PNP level sensor.
 
GSP10-35lbHNS04 has a 10:1 boost ratio, 35lb pail, cast aluminum assembly with steel pusher plate inductor, and one DC NPN level sensor.

RAM CODE

CODE

RAM STYLE

MAXIMUM HEIGHT OF PAIL / FRAME

GSP

Single Post Ram

27” / 79.9”

Note: Maximum height depends on options purchased.

PUMP MOTOR

CODE

BOOST RATIO

MAXIMUM OUTPUT PRESSURE

MAXIMUM OUTPUT FLOW

5

5:1

500 PSI at 100 PSI

18,900 cc / minute

10

10:1

1,000 PSI at 100 PSI

15,500 cc / minute

INDUCTOR SEAL

SEAL CODE

PAIL SIZE

SEAL MATERIAL DESCRIPTION

BD

35

Inductor designed for use with pails containing a moisture barrier bladder bag.

CV

35

Inductor with sealed cover for use with UV cure materials.

HNS

35lb

Cast Aluminum Assembly with Steel Pusher Plate.

Add H after any inductor seal code to add a heated inductor assembly for use with thicker materials. 
Add N after any inductor seal code to add a nitrogen blanket for use with moisture cure materials. 
See example part numbers above.  

OPTIONS AVAILABLE FOR GSP/GSPM PUMPS

CODE

DESCRIPTION

00

Basic Pump (No Control Options) 

01

Pneumatic Cam Actuated Empty Shut Off 

03

One DC PNP Level Sensor

04

One DC NPN Level Sensor

08

24 VDC 3-way NC Solenoid Valve

11

Two DC PNP Level Sensors

12

Two DC NPN Level Sensors

38

24 VDC Control Panel with Prime Button and Stack Light

38-120

Same as 38 with 24VDC or 120 VAC controls

70

24 VDC Control Panel with Prime Button and Stack Light with Ethernet Communication

71

Control Panel with HMI

 

Files