GPMD16000 OIL DISPENSERS

Nose-mountable, air-operated, single-acting, adjustable, metered shot (piston) dispenser;

Accurate dispensing of 0.02 cc to 6.20 cc shots of oil (depending on model selected).

 

Positive piston displacement dispenser accurately delivers measured shots of oil. 

Change shot size quickly and easily using fine-thread adjustment screw with a lock nut.

 

Swivel grease outlet allow inlet port to point in any direction and also facilitates easy installation.

Can dispense up to 40 times per minute at the maximum shot size.

 

Uses piston displacement to measure oil and will dispense set amounts regardless of temperature.

Operate at 50 to 120 psi with 3-way NC Air Valve.

 

Operates with low-pressure Oil (up to 100 psi).

Photos

DISPENSER SPECIFICATIONS

Basic Part Number

Adjustable Volume

Boost Ratio (less return spring)

Note:

GPMD16020-__-__-__

0.02 to 0.20 cc

36 to 1

__-__-__  See OPTION LIST to complete part number. Include at least one option.  There is no maximum number of options. 

GPMD16080-__-__-__

0.02 to 0.80 cc

12.25 to 1

GPMD16125-__-__-__

0.06 to 1.25 cc

11.56 to 1

GPMD16369-__-__-__

0.13 to 3.69 cc

11.76 to 1

GPMD16620-__-__-__

2.00 to 6.20 cc

10.24 to 1

 
Notes: Basic part number must include at least one Option ID to be complete.  The part number for a dispenser with no options should include the suffix -00.  The GPMD16620-00 cannot be adjusted to dispense less than 2 cc.

OPTION LIST

(choose one or more)

NOTES:

Each M8 stroke sensor requires a #0983 cord.

Single stroke sensors will be factory set to recognize “dispense complete” message.

Each flow sensor or M12 stroke sensor requires a #1850 cord.

OPTION ID

DESCRIPTION

CONNECTOR(s)

FACTORY INSTALL?

CUSTOMER INSTALL?

00

No Options (dispenser will have a magnetic piston)

Not Applicable

-

-

01

Single M8 PNP Stroke Sensor

One M8 DC

Yes (with track)

No

02

Two M8 PNP Stroke Sensors

Two M8 DC

Yes (with track)

No

03

Calibration Scale

Not Applicable

Yes

Yes

11

KA6003 mounting block installed on dispenser with 1/4” NPT female outlet, vertical and horizontal mounting holes and a SAE-4 port for (not included) EPS1001 electronic pressure sensor.

Not Applicable

Yes

Yes

12

Two M8 NPN Stroke Sensors

Two M8 DC

Yes (with track)

No

15

Single M8 NPN Stroke Sensor

One M8 DC

Yes (with track)

No

21

Clamp bracket used to side mount dispenser.

Not Applicable

Yes

Yes

28

Viton Seals (rod seals, face seals, and check seals)

Not Applicable

Yes

Yes

 

Files