GPMD10000 SERIES GREASE DISPENSERS

Medium Output LOW Pressure - GPMD10000 series for dispensing amounts from 0.02 cc to 3.66 cc.
Base-mountable, air-operated, single-acting, adjustable, metered shot (piston) dispenser

Accurate dispensing of 0.02 cc to 3.69 cc shots of grease (depending on model selected).

 

Positive piston displacement dispenser accurately delivers measured shots of grease. 

Change shot size quickly and easily using fine-thread adjustment screw with a lock nut.

 

Bases are available with from 1 to 8 stations and also with separate air inlets for independent operation.

Can dispense up to 40 times per minute at the maximum shot size.

 

Uses piston displacement to measure grease and will dispense set amounts regardless of temperature.

Operate at 50 to 120 psi with 3-way NC Air Valve.

 

Operates with low-pressure grease (up to 200 psi).

 

Photos

Video

 

GPMD10020-__-__-__

0.02 to 0.20 cc

36 to 1

__-__-__  See OPTION LIST to complete part number.  Include at least one option.  There is no maximum number of options. 

GPMD10080-__-__-__

0.02 to 0.80 cc

12.25 to 1

GPMD10125-__-__-__

0.06 to 1.25 cc

11.56 to 1

GPMD10369-__-__-__

0.13 to 3.69 cc

11.76 to 1

Note: Basic part number must include at least one Option ID to be complete. The part number for a dispenser with no options will include the suffix -00. Separate additional options with dashes. GPMD10000 Series Dispenser options are listed on the next page.
See complete part number example below:  (enter option numbers in order – lowest number to highest number)
GPMD10080-02-07 (GPMD10080 dispenser with two PNP stroke sensors and bleed valve).

OPTION ID

DESCRIPTION

CONNECTOR(s)

FACTORY INSTALL?

CUSTOMER INSTALL?

00

No Options (dispenser will have a magnetic piston)

Not Applicable

-

-

01

Single M8 PNP Stroke Sensor

M8 DC Connector

Yes (with track)

No

02

Two M8 PNP Stroke Sensors

Two M8 DC Connectors

Yes (with track)

No

03

Calibration Scale

Not Applicable

Yes

Yes

12

Two M8 NPN Stroke Sensors

Two M8 DC Connectors

Yes (with track)

No

15

Single M8 NPN Stroke Sensor

M8 DC Connector

Yes (with track)

No

16

Inductive Flow Sensor, 24 VDC PNP

M12 DC Connector

Yes

No

17

Inductive Flow Sensor, 24 VDC NPN

M12 DC Connector

Yes

No

18

Analog Flow Sensor (0-10V)

M12 DC Connector

Yes

No

22

Premium Seals for Use with Abrasive Material

Not Applicable

Yes

Yes

23

Air Operated Outlet Check Valve

Not Applicable

Yes

No

24

Hand-held Pistol Style Dispense Gun with Electronic Trigger with Assorted Nozzles

M12 DC Connector

Yes

Yes

25

Hand-held Pistol Style Dispense Gun with Pneumatic Trigger with Assorted Nozzles

M12 DC Connector

Yes

Yes

26

Flow Sensor, Digital 24 VDC PNP/NPN, Analog 0-10V or 4-20mA (IFM Sensor)

M12 DC Connector

Yes

 

28 All Viton Seals Not Applicable  Yes         Yes 

Note: Each M8 stroke sensor requires a #0983 cord. Single stroke sensors will be factory set to recognize “dispense complete” message.  Each flow sensor or M12 stroke sensor requires a #1850 cord.

Bases with 1/4" NPT common air ports on both ends are for simultaneous operation of all grease dispensers

 

PART NUMBER

Air Port Options

Material Port Size

Air Port Size

MDM1000-X

Common

1/4" NPT

1/4" NPT

MDM1000SA-X

Separate

1/4" NPT

1/4" NPT

MDM1006-X

Common

3/8" NPT

3/8" NPT

MDM1006SA-X

Separate

3/8" NPT

1/8" NPT

MDM1008-X

Common

1/2" NPT

1/2" NPT

MDM1008SA-X

Separate

1/2" NPT

1/8" NPT

Note: Manifolds can be also purchased with independent air supply by adding the SA option to the end of the part number.  For example, the MDM1000-5SA manifold can hold 5 dispensers and each has an independent air port but common material port.

 

Files