AIRLESS SHOT NOZZLES

SPRAY PATTERNS

SC (Solid Cone)

- Great for spraying a wide variety of surfaces.

- Great for thick grease and oil.

FC (Fine Cone)

- Great for spraying oil or thick grease.

- Great for applications where uniform coverage is critical.

 

EM (External Mix):
- Works great for oil
- Not for use with grease!
- Great for applications where a large surface area needs to be covered.
- Atomizes the material being sprayed!

RC (Radial Coat):
- Great for spraying the inside of a bore.

- Works well with most oil and thin grease.

- Will not work with thick grease!

AS (Airless Shot)

- Works great with thin oil, up to 30 weight

- Clean Shot, No over spray

- Has built in check valve to prevent dripping

 

HC (Hollow Cone):

- Great for spraying a surface where a large coverage area is required.

- Works well with most oil and thin grease.

- Will not work with thick grease!


Photos

AIRLESS SHOT NOZZLES:

PART NUMBER

X1=LENGTH IN INCHES

X2=CONNECTION FITTING

MOUNTING STYLE

AS1002-XX

 

 

1"-24"

Blank, no fitting, 1/8” compress-align nut only

 

 

Tube Clamps (2X)

AS1002-XX-2

Compress-align union for direct connection to 1/8” tubing.

AS1002-XX-10-32

Compress-align fitting for 10-32 female port.

AS1002-XX-1/4-28

Compress-align fitting for ¼-28 female port.

AS1002-X1-X2: Standard 1/8" OD copper tube, X1 is the length and X2 is the connection fitting style.

AS1002SS-X1-X2: 1/8" OD Stainless Steel Tube

Note: does not spread oil out at all, spray pattern is narrow, roughly .12". Limited spray distance, up to 6".


Files